Products Explain: QX-118 acid silicone sealant
1. Characteristics:
● Single component, RTV-1, acid fast curing, easy to use
● 10-15 minutes forms skin, fully cure about 24h.
● Good movement resistant after cured;
2. Purpose:
● Sealing for all kinds of glass, stone, aluminum window and door, etc
● Filling or sealing for many construction materials
3. Instruction of usage:
● Apply to clean and dry surface
● Tool after application before skin formed.
4. Caution
● Can’t be used as structural sealant;
● Non-poisonous after cured; Direct contact with uncured sealant may imitate skin and eyes. In case of contact, immediately rinse with water and consult physician.
● Keep out of reach of children
5. Technology support
Offer free technology consultation for customer during usage
6. Application Standard:
● Standard GB/T 14683-2003 Construction silicone sealant
7. Storage
● Store for 6 months below 27°C in cool, dry place after date of manufacture
8. Net content: 280ml
9 Typical Technology Data:
Performance
|
National standard GB/T 14683-2003
|
Measured Value
|
Testing method
|
Slumpability mm
|
vertical
|
≤3
|
0
|
GB/T 13477
|
horizontal
|
0
|
0
|
Extrusion (ml/min)
|
≥80
|
2180
|
Tack-Free Time (min)
|
≤180
|
10
|
Permanent set adhesion
|
standard
|
Non destroyed
|
Non destroyed
|
High & low temperature
|
Non destroyed
|
Non destroyed
|
UV
|
Non destroyed
|
Non destroyed
|
Immersion
|
Non destroyed
|
Non destroyed
|
Elasticity recovery %
|
≥80
|
86.5
|
Loss of Heating %
|
≤10
|
8.94
|
Tensile strength in adhesion (Mpa)
|
standard
|
>0.40
|
0.421
|
-20℃
|
0.452
|
Elongation at ultimate strength %
|
/
|
168
|
Hardness (HsA)
|
/
|
21
|
GB/T 531
|
Movement Capability %
|
±20
|
±20
|
ASTMC 719
|
storage
|
Store for 6 months below 27°C in cool, dry place after date of manufacture
|
|